Disclosure: this post contains affiliate links. If you buy through one, this site earns a commission at no extra cost to you. See the privacy policy.
How to Turn On Pocket and Start Recording
Turn on Pocket with a 5 second hold, then press once or tap Record. How to tell it is really recording, and what the light means when it won't start.
To turn on Pocket, hold the side button for 5 seconds until the light blinks blue (not paired yet) or goes solid blue (paired). To start recording, press the side button once or tap Record in the Pocket app; you should hear a beep and the light turns solid amber, and one more press stops it. This page is that moment: on, recording, and sure it is actually running. How I use Pocket for meetings, ideas, and life is the day-to-day hub, and how to set up Pocket and make your first recording is the full setup walk.
Try the recorder I use: Get Pocket . I use and pay for this.
Button, light, and charge facts below come from Pocket’s unboxing doc, status light doc, troubleshooting doc, and Pause and Resume doc, re-checked November 15, 2026.
How do you turn on the Pocket recorder?
Hold the side button for 5 seconds. A new Pocket ships asleep, so the first hold can look like nothing is happening. That is normal, and it is covered in the setup walkthrough.
The light then blinks blue if Pocket is not paired yet, or goes solid blue if it already is. If no light comes on at all, the docs give more than one charge time, and both are here. In the Box says to give it 10 minutes of charge and try again, and the status light page says the same 10 minutes. Troubleshooting says to charge for 15 minutes or more as a first check, and to leave it charging for 30 minutes if no LED ever shows.
Which way is the slider before you press record?
Check the slider first. Down is Conversation mode, for people in the room. Up is Call mode, for a phone call with Pocket on the back of the phone. Phone calls have their own page, how Pocket records phone calls. The full slider question lives on Pocket’s lights and buttons.
How do you start a recording on Pocket?
Three ways:
| Way | What you do |
|---|---|
| Side button | Press once. |
| Pocket app | Tap Record. |
| Laptop meeting | Use the Pocket desktop app on macOS or Windows, not the device. |
The first two come from Pocket’s Pause and Resume doc, which says you can press the side button once or tap Record in the app. Laptop meetings go through the desktop app, which records Zoom, Teams, and Google Meet. The walkthrough is using Pocket as a meeting recorder.
How do you know Pocket is actually recording?
Look for three signals in a row. Pocket’s troubleshooting doc says you should hear a beep and the LED turns amber when a recording starts. The status light page calls that solid amber. In the app, a recording sheet is open while it is capturing.
The beep matters more than it sounds. In Call mode Pocket sits on the back of the phone, and the unboxing doc puts the status light on the face of the device, so the light faces away from you. The beep is the signal you can get without flipping the phone over. I am repeating the beep as Pocket’s troubleshooting doc states it, not as a sound I re-checked on my unit today.
Why won’t Pocket start recording?
When you press the button, use the light you actually see:
| Light when you press | What it means | What to do |
|---|---|---|
| No light | Off, asleep, or flat | Hold 5 seconds. If it stays dark, charge it. Use the 10 minute figure from the unboxing and status light docs first, then the 15 minute and 30 minute figures from troubleshooting if it is still dark. |
| Blinking blue | On, not paired | Pair it first. |
| Solid white | Paused, not recording | Press once, or double-press, to resume. Pause needs firmware 1.8 or later. |
| Blinking purple | Firmware update running | Wait for it to finish. Troubleshooting says to make sure the app is not updating firmware. |
| Solid amber already | It is already recording, and your press just stopped it | Check the app. |
| Still nothing after that | The device did not take the press | Restart Pocket: hold 5 seconds to turn off, wait 10 seconds, hold 5 seconds to turn on, then try again. That restart is from the troubleshooting doc. |
I left out whether Pocket records while it is charging (blinking green) or before it is paired. Pocket’s docs do not say, and I did not re-test those two cases for this page.
How do you pause and stop a recording?
To stop, press the side button once. To pause, on firmware 1.8 or later, double-press while recording; the light goes white. Resume with a single press or a double-press. The full button table is on Pocket’s lights and buttons.
The docs disagree about the light after you stop. The Pause and Resume table says the light turns off. The status light page says solid blue is idle or standby. I did not pick one from a fresh look at my unit, so both are here with their sources.
What happens after you stop?
The file stays on the device until the app syncs it, then the transcript and summary appear. How the Pocket recorder works follows that path. This page does not repeat the sync steps. Settings I actually change are on best Pocket settings.
Frequently asked questions
How to turn on Pocket recorder?
How to turn on Pocket AI?
How to record on Pocket?
How to record with Pocket AI?
How to start recording on Pocket?
Reader reviews: Pocket AI Recorder
No reader reviews of Pocket AI Recorder yet. If you own or have used it, yours could be the first.
Write a review of Pocket AI Recorder
Reader reviews are written by site visitors, are not verified purchases, and are separate from any rating I give a product I own. Star ratings in search results come only from these on-site reviews.
Disagree or have a war story? Reply on X